The wood has natural properties that may help it withstand the elements however to make it final even longer we apply a ‘color harmonising’ end in the factory, which contains a preservative. We then apply a micro-porous protective stain or paint finish.
Normal Cleaning – perform usually at least twice a 12 months
For general cleaning use a soft material and water with soap or washing-up liquid
To remove grease marks, use washing-up liquid with little or no water then rinse with clean water
Don’t use glass cleaner on frames
Do not use kitchen / bathroom cleaners
Wood just isn’t indestructible. Maintenance of the coated finish is important, not only to keep the window or door looking good, but with the proper upkeep your products should last even longer than their guarantees.
It is strongly recommended that the surface coating is inspected yearly and if required you need to re-coat the wood with micro-porous stain or paint.
Clean the window or door as above and let it dry utterly
Use a fine grade of wet and dry silicon carbide abrasive paper to lightly rub down the existing paint or stain end (don’t try to rub via the present coat. This exercise is intended only to remove any grease and dust and provide a smooth surface)
Remove all dust and particles with a wet cloth, taking care to avoid inhalation of the mud
Allow to dry totally
Apply the micro-porous finish with a brush, taking care not to overload the comb or get the end on the seals or gaskets
Only use micro-porous paint or stain. Keep away from non-micro-porous finishes comparable to yacht varnish as they need stripping and renewing more often. And you need to comply with the instructions on the container carefully.
Scratches and Chips
Damaged timber needs to be re-painted or re-stained instantly
First, prepare the damaged space by removing all surface damage with a light abrasive following the road of the grain
Remove all dust and particles with a wet cloth, taking care to keep away from inhaling the dust
The place crucial, a timber filler could also be used to repair the damage and provide a smooth surface for reapplying the finish
Re-apply the finish to the damaged area as described above
Failure to deal with scratches and chips will invalidate the product guarantee.
Knots, Grain and Movement
Wood is a natural product and features akin to knots and variations in grain look do occur. This will not be a fault but a part of the natural great thing about our timber product. As a natural product some degree of movement by way of expansion or contraction will be expected..
Should you beloved this information in addition to you wish to receive more info about Traditional Timber Windows generously visit the site.